|
|
Tapeswitch
Safety Mats:
- Custom shapes and sizes
- Durable construction
- Fail-safe operation
- Easy installation
- Chemical and abrasion resistant
- Non-slip corrugated surface
- Low pressure actuation
|
| Safety mats systems
are designed to protect operators working at or near dangerous
machines. They operate when pressure (normally from a person's foot)
is applied to the mat surface. This results in a stop signal being
sent to the machine control system.
Guardscan safety mats comprise a series of Tapeswitches sealed
between two layers of durable Koroseal material and are available in
a range of custom shapes and sizes. Two models are available which
differ slightly in their construction to suit the demands of the
application.
Typical applications:
robot cells, tube bending machines, punching machines.
|
CKP/S1
 |
Tapeswitch's CKP/S1
safety mat is designed for heavy-duty industrial use and
applications include robot cells and tube-bending machines.
Material: Koroseal
Maximum length: 2.4m
Maximum width:
1.2m
Actuation force: <100N (80mm dia. test piece)
Weight:
16kg/mē
|
Armormat
|
The Armormat is
similar in design to the CKP/S1 but is designed to withstand heavy
impacts. The mat incorporates a membrane and a layer of tough
polycarbonate which gives added protection to the switching elements
in case the surface material is pierced.
Material: Koroseal
Maximum length: 2.4m
Maximum width:
1.2m
Actuation force: <100N (80mm dia. test piece)
Weight:
21kg/mē
|